6.38" Diameter Drum Motor

6.38in Diameter Drum Motor

Performance Specifications

HP
Minimum Face Width
FPM (nominal)
Belt Pull (lbs)
Drum Torque (ft/lbs)
0.5
17.72"
19
867
231
0.5
15.75"
24
687
182
0.75
15.75"
31
38
47
797
650
526
212
173
140
0.75
13.78"
47
59
75
94
526
419
330
263
140
111
88
70
1
15.75"
59
75
94
149
188
235
559
439
351
221
175
140
148
117
93
59
47
37
1
17.72"
38
867
231
1.5
15.75"
118
149
188
419
332
263
111
88
70
2
17.72"
94
141
188
235
701
467
351
280
186
124
93
75
3
17.72"
118
149
188
295
377
476
838
663
526
335
262
208
223
176
140
89
70
55

Standard Face Widths - Weight (lbs)

1. Maximum face width is 96"
2. E-brake option increases min. face width by 1.97"
3. Other speeds and face widths are available
4. Add 3.94" to min. face width for bolt-on end caps
5. Maximum lagging thickness is 1/4" (8% increase in finished speed)
6. For V-groove tube dia. of 6.50", length must be two times the min. face width
7. For V-groove tube dia. of 7.45", length can be same as min. face length (17% inrease in finished speed)
8. All motors can be single or dual voltage 230v or 460v 3 phase (110v or 220v single phase motors are special order)