4.39" Diameter Drum Motor

  4.39in Diameter Drum Motor

Performance Specifications

HP
Minimum Face Width
FPM (nominal)
Belt Pull (lbs)
Drum Torque (ft/lbs)
0.2
9.84"
47
59
71
83
94
140
112
93
79
70
26
20
17
15
13
0.25
11.81"
28
35
294
235
54
43
0.4
11.81"
47
59
71
83
94
280
223
186
159
140
51
41
34
29
26
0.5
11.81"
94
118
142
165
189
260
307
354
175
140
116
100
87
63
54
47
32
26
21
18
16
12
10
9

Standard Face Widths - Weight (lbs)

1. Maximum face width is 51.18"
2. E-brake option increases min. face width by 1.97" (E-brake available in 230v or 460v 3 phase)
3. Other speeds and face widths are available
4. Add 3.94" to min. face width for bolt-on end caps
5. Maximum lagging thickness is 1/8" (6% increase in finished speed)
6. V-groove option must be two times the min. face width
7. Same dia. (4.45") grooved tube is only option
8. All units are available in single phase single voltage 110v or 220v, and 3 phrase, single voltage 230v or 460v (220v single phase motors are special order)