3.19" Diameter Drum Motor

3.19in Diameter Drum Motor

Performance Specifications

HP
Minimum Face Width
FPM (nominal)
Belt Pull (lbs)
Drum Torque (ft/lbs)
0.045
9.84"
12
18
124
82
16
11
0.07*
7.87" - 9.83" only
27
35
47
59
94
118
85
66
49
39
25
20
11
9
7
5
3
3
0.095*
9.84"
27
35
47
59
94
118
116
89
67
53
33
27
15
12
9
7
4
4
0.10*
7.87" - 9.83" only
47
71
94
118
189
236
70
46
35
28
17
14
9
6
5
4
2
2
0.16*
9.84"
47
71
94
118
189
236
112
74
56
45
28
22
15
10
7
6
4
3

Standard Face Widths - Weight (lbs)

1. Maximum face width is 37.40"
2. E-brake option increases min. face width by 1.97" (E-brake available in 230v or 460v 3 phase only)
3. Other speeds and face widths are available
4. Add 3.94" to min. face width for bolt-on end caps
5. Maximum lagging thickness is 1/8" (8% increase in finished speed)
6. V-groove option must be two times the min. face width
7. Same dia. (3.23") grooved tube is only option
8. All motors are single voltage
9. * Next to HP output means these units are available in single phase single voltage 110v or 220v. All units are available in 3 phase single voltage 230v or 460v (220v single phase motors are special order)